Calibrated Legionnaires' Water Temperature Thermometer Kit

£140.00 exc. VAT
Legionnaires' / Legionella thermometer kit specifically designed for legionnella testing.
0.1°C resolution
probes included
FREE certificate of calibration
FREE water resistant timer
FREE tub of 70 Wipes
FREE ABS carrying case
Quantity:
The Legionnaires' Water Temperature Thermometer Kit contains everything required to monitor water supply temperatures for the prevention of Legionella growth. All employers who manage premises with hot/cold water systems and/or a wet cooling system have a legal responsibility to identify any risk of Legionella contamination and to prevent or control it.
The thermometer kit includes a robust and easy-to-use Therma 1 Industrial Thermometer that operates through the range of -99.9 to 1372 °C with a 0.1 °C or 1 °C resolution. With a 10000 hour battery life the 1.5 volt AAA batteries will last at least 5 years.
The Legionnaires' kit features three different probes for testing varying elements of the water system. The Penetration Temperature Probe can be used to record the temperature of tap water, the Ribbon Surface Temperature Probe for the surface of pipes and tanks and the Wire Probe for any areas that are difficult to reach.
The kit comes with a FREE traceable certificate of calibration, Water Resistant Countdown Timer, mini tub of Probe Wipes and ABS carrying case.
Incorrect water temperature is a key risk factor for Legionella growth. The Legionella bacteria multiply in water at temperatures between 20 to 45°C, particularly if a supply of nutrients is present, such as scale, rust, sludge or algae. A typical method of control is to store cold water below 20°C. Hot water should be stored above 60°C and distributed at above 50°C.
Current legislation means that if you are the employer or person in control of premises, you must organise a risk assessment. The revised Approved Code of Practice (ACOP) issued by the Government's Health and Safety Executive (HSE) significantly extends the scope of its guidance on control of legionella bacteria in water.
The code now applies to all hot and cold water systems in the workplace regardless of their capacity, i.e. the lower limit of 300 litres previously used to exclude domestic systems no longer applies. Whilst domestic systems may represent a risk, the code only applies to risk arising from a work activity.
This means that all employers who manage premises with hot/cold water systems and/or a wet cooling system have a legal responsibility to identify any risk of contamination and to prevent or control it.
Each Legionella thermometer kit contains:
1 x 221-041 Therma 1 thermometer
1 x 123-160 penetration probe
1 x 123-030 precision ribbon surface probe
1 x 133-362 PTFE wire probe
1 x 806-150 countdown timer
1 x tub of 70 MiniWipes (836-022)
1 x 834-150 ABS carrying case
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings